Skip Ribbon Commands
Skip to main content
Dr Aamir Mubashar(ON STUDY LEAVE)
Assistant Professor
Department of Mechanical Engineering

SMME
National University of Sciences and Technology (NUST)
NUST, H-12, Islamabad
Tel : +92 51 9085 6071

Specialization
Adhesive Joints, Multiphysics and Multiscale Simulations, Finite Element Method

Education
PhD (Mechanical), Loughborough University, Loughborough, United Kingdom

Dr Aamir Mubashar is a senior member of the Computational Mechanics Research Group. He has more than ten years of industrial experience at various positions in the areas of design and manufacturing. His present projects include performance determination of structural adhesive joints under various conditions, response of materials under impact loadings, structural optimization and finite element modelling of manufacturing processes.​

 ​​
  • Impact resistance of materials
  • Adhesive joints
  • Finite Element Modelling
  • Structural optimization
  • Multiscale modelling

Journal Publications:

  • Mativenga, P.T. and A. Mubashar, White layer formation and tool wear in high speed milling of 57HRc tool steel using coated and uncoated tools. Int. J. of Agile Systems and Management, 2007. 2(2): p. 172-185.
  • Mubashar, A., I.A. Ashcroft, G.W. Critchlow, and A.D. Crocombe, Modelling cyclic moisture uptake in an epoxy adhesive. J. Adhesion, 2009. 85: p. 711-735.
  • Mubashar, A., I.A. Ashcroft, G.W. Critchlow, and A.D. Crocombe, Moisture absorption-desorption effects in adhesive joints. Int. J. Adhesion and Adhesives, 2009. 29(8): p. 751-760.
  • Mubashar, A., I.A. Ashcroft, G.W. Critchlow, and A.D. Crocombe, Strength prediction of adhesive joints after cyclic moisture conditioning using a cohesive zone model. Engineering Fracture Mechanics, 2011. 78(16): p. 2746-2760.
  • Mubashar, A., I.A. Ashcroft, G.W. Critchlow, and A.D. Crocombe, A method of predicting the stresses in adhesive joints after cyclic moisture conditioning. The Journal of Adhesion, 2011. 87(9): p. 926-950.
  • Mubashar, A., I.A. Ashcroft, and A.D. Crocombe, Modelling Damage and Failure in Adhesive Joints Using A Combined XFEM-Cohesive Element Methodology. The Journal of Adhesion, 2014. 90(8): p. 682-697.
  • Akram, S., S.H.I. Jaffery, M. Khan, A. Mubashar, and L. Ali, A Numerical Investigation of Effects of Cutting Velocity and Feed Rate on Residual Stresses in Aluminum Alloy Al-6061. International Journal of Materials, Mechanics and Manufacturing, 2015. 3(1): p. 26-30.
  • Batool, S., M. Khan, S.H.I. Jaffery, A. Khan, A. Mubashar, L. Ali, N. Khan, and M.N. Anwar, Analysis of Weld Characteristics of Micro-Plasma Arc Welding (MPAW) and Tungsten Inert Gas Welding (TIG) of Thin Stainless Steel (304L) Sheets. Journal of Materials: Design and Applications, 2015.
  • Jaffery, S.H.I., S. Sadiq, M. Khan, L. Ali, N. Anwar, and A. Mubahsar, Use of Wear Map Approach in Optimization of Drilling Parameters for Petroleum Exploration. International Journal of Mechanical And Production Engineering, 2015. 3(6): p. 63-65.
  • Rehman, S.u., M. Khan, A.N. Khan, S.H.I. Jaffery, L. Ali, and A. Mubashar, Improvement in the Mechanical Properties of High Temperature Shape Memory Alloy (Ti50Ni25Pd25) by Copper Addition. Advances in Materials Science and Engineering, 2015. 2015: p. 7.
  • Saif-ur-Rehman, M. Khan, L. Ali, S.H.I. Jaffery, and A. Mubashar, Effect of Cu Addition on Microstructure and Transformation Temperatures of Ti50Ni25Pd25 High Temperature Shape Memory Alloy. International Journal of Mechanical And Production Engineering, 2015. 3(6): p. 96-100.
  • A. Azam, A. Mubashar, I.A. Ashcroft, E. Uddin, S.H.I. Jaffery, A numerical study of the effect of ply-layup on the strength and stiffness of a composite T-joint under three point bending, Journal of Adhesion Science and Technology, (2017).
  • M.W. Ali, A. Mubashar, E. Uddin, S.W.U. Haq, M. Khan, An experimental and numerical investigation of the ballistic response of multi-level armour against armour piercing projectiles, International Journal of Impact Engineering (2017).

International Conference Publications as Leading Author:

  • Masood, T., A. Mubashar, and J.A. Khan, Techniques used in the simulation and control of PROTEC comptuer numerically controlled (CNC) machine software, in IEEE ICIT '02. 2002 IEEE International Conference. 2002, IEEE: Bangkok, Thailand. p. 504-509.
  • Mubashar, A., I.A. Ashcroft, G.W. Critchlow, and A.D. Crocombe. Strength Recovery in Epoxy Adhesive Joints under Cyclic Moisture Conditioning Environment. in ACE-X 2009 3rd International Conference on Advanced Computational Engineering and Experimenting. 2009. Rome, Italy.
  • Akram, S., S.H.I. Jaffery, M. Khan, A. Mubashar, and L. Ali. A Numerical Investigation of Effects of Cutting Velocity and Feed Rate on Residual Stresses in Aluminum Alloy Al-6061. in ICIEA 2014, International Conference on Industrial Engineering and Applications. 2014. Sydney Australia: Science and Engineering Institute.
  • Jaffery, S.H.I., S. Sadiq, M. Khan, L. Ali, N. Anwar, and A. Mubahsar. Use of Wear Map Approach in Optimization of Drilling Parameters for Petroleum Exploration. in International Conference on Engineering and Natural Science. 2015. London, United Kingdom: International Institute of Engineers and Researchers.
  • Khan, M., S.H.I. Jaffery, and A. Mubashar. Finite Element Analysis of Knee Implant for Orthopaedic Applications. in International Conference on Medical, Biological and Pharmaceutical Sciences. 2015. London, United Kingdom: International Institute of Engineers and Researchers.
  • Saif-ur-Rehman, M. Khan, L. Ali, S.H.I. Jaffery, and A. Mubashar. Effect of Cu Addition on Microstructure and Transformation Temperatures of Ti50Ni25Pd25 High Temperature Shape Memory Alloy. in International Conference on Mechanical, Aeronautics and Production Engineering. 2015. London, United Kingdom: International Institute of Engineers and Researchers.
  • A. Munir, A. Mubashar, I.A. Ashcroft, E. Uddin, S. Waheed, Investigation of ballistic response of a multilayer armour box against a high velocity kinetic energy projectile, in:  11th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2017, Vienna, Austria, 2017.

International Book Contributions:

  • Lucas F. M. da Silva, Andreas Öchsner, Robert D. Adams (Eds) “Handbook of Adhesion Technology” by Springer-Verlag, Berlin Heidelberg, Germany, 2011.
  • Raul D. S. G. Campilho (Eds) “Strength Prediction of Adhesively Bonded Joints” by CRC Press Taylor & Francis Group, 2017.

  • Mechanics of Materials
  • Advanced Mechanics of Materials
  • Finite Element Method​