Skip Ribbon Commands
Skip to main content
Dr Mushtaq Khan, CEng MIMechE
Assistant Professor
Department of Design and Manufacturing Engineering

SMME
National University of Sciences and Technology (NUST)
H-12, NUST HQ, Islamabad
Tel : +925190856063

Specialization
Rapid Prototyping / Laser Manufacturing

Education
PhD (Loughborough University) UK

Current Status profile:
Assistant Professor, School of Mechanical and Manufacturing Engineering (SMME), National University of Sciences and Technology (NUST), Sector H-12, 44000, Islamabad, Pakistan.
ACADEMIC QUALIFICATIONS:
 
• PhD - Loughborough University UK.
• Masters of Science in Mechanical Engineering (Specialization in Manufacturing Engineering) College of E&ME, National University of Sciences and Technology (NUST), Rawalpindi, Pakistan .
• Bachelors in Mechanical Engineering, University of Engineering and Technology (UET) Taxila, Pakistan.
 
PROFESSIONAL AFFILIATIONS/ CERTIFICATION
 
American Society for Testing and Materials (ASTM): (1597813)
 
FULL VOTING MEMBER Committee F42 on Additive Manufacturing Technologies:   Subcommittees:  F42.01 Test Methods, F42.04 Design, F42.05 Materials and Processes, F42.90 Executive, F42.91 Terminology, F42.95 US TAG to ISO TC 261.
 
Institute of Mechanical Engineers (IMechE)
 
  • Member IMechE : Membership Reference Number 80181402
  • Chartered Engineer (CEng) [application under review]
    Computer Aided Design (CAD): PTC Pro-Engineer Basic and Advanced Part Modeling certification

Reviewer International Journals
  • Rapid Prototyping Journal (Emerald) since 2011.
  • International Journal of Production Research (Taylor and Francis) since 2012.

Pakistan Engineering Council (PEC)

Registered Engineer (RE)

Higher Education Commission (HEC) of Pakistan

HEC approved PhD supervisor since 2011.

 

 

​OIC  Of  Rapid Prototyping (RP) Lab

 

TEACHING/ RESEARCH/ INDUSTRIAL EXPERIENCE
 
Apprenticeship/ Industrial Experience
  • Worked in collaboration with ARGEN Corporation USA during PhD for 02 years.
  • Worked in collaboration with ESI Group Germany as Research Fellow for 01 year.
 
Teaching Experience
  • Worked as Assistant Professor at NUST School of Mechanical and Manufacturing Engineering (SMME) since Jan 2010.
  • Was Officer In Charge (OIC) of Rapid Prototyping (RP) Lab for this duration.
 
Research Experience
 
Worked as Marie Curie Research Fellow - European FP7 research project ‘INLADE’ related to Laser Cladding at the University of Manchester. 
Research Interests
  • Manufacturing  of Functionally Graded Materials parts using Rapid Manufacturing (RM) technologies
  • Selective Laser Melting and Selective Laser Sintering of metals and polymers
  • Selective Laser Melting of Bio-Compatible metals and alloys for medical applications

 

Academic Task (s)
 
Designing and implementation of MS program in “Design and Manufacturing Engineering” at the School of Mechanical and Manufacturing Engineering (SMME), NUST.
 
Industrial project (s)

 

 

 

  • Co-Principal Investigator (PI) in “Drilling of Hard Rocks for Petroleum Exploration” Started April 2011, Value: Rs 500,000/- [Completed]
  • Design and Rapid Prototyping (RP) of console for secure communication system, Value: Rs 200,000/- [Completed]Provided Rapid Prototyping (RP) services to a number of industries as Officer In Charge (OIC) of Rapid Prototyping (RP) Lab at NUST SMME.
 
Student Supervision

 

 

 

  • Supervised/ Co-supervised 05 MS students at NUST SMME.
  • Currently supervising 03 PhD student.
 

RESEARCH PUBLICATIONS

ISI Impact Factor Journal Publication (s)

  1. Saif ur Rehman, Mushtaq Khan, A.Nusair Khan, Khurshid Alam, Syed Husain Imran Jaffery, Liaqat Ali, Ashfaq Khan (2017), Influence of Cu addition on transformation temperatures and thermal stability of TiNiPd high temperature shape memory alloys, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. [ISI Impact factor 0.793] [Accepted for publication]
  2. Warsi, Salman; Jaffery, Syed; Ahmad, Riaz; Khan, Mushtaq; Ali, Liaqat, Agha Mujtaba, Akram, Sohail (2017), Development of energy consumption map for orthogonal machining of Al 6061-T6 alloy, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture [ISI Impact factor 0.978] [Accepted for publication]
  3. Zahid Faraz, Syed Waheed ul Haq, Liaqat Ali, Khalid Mahmood, Wasim Akram, Tarar Aamer, Ahmed Baqai, Mushtaq Khan, Syed Husain Imran (2016) Sheet-metal bend sequence planning subjected to process and material variations, International Journal of Advanced Manufacturing Technology (IJAMT) [Accepted for publication] [ISI Impact factor 1.458] 
  4. Zahid Faraz, Syed Waheed ul Haq, Liaqat Ali, Khalid Mahmood, Wasim Akram, Tarar Aamer, Ahmed Baqai, Mushtaq Khan, Syed Husain Imran, Rizwan Saeed Choudhry (2016) Development of a STEP-compliant design and manufacturing framework for discrete sheet metal bend parts, Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture [Accepted for publication] [ISI Impact factor 0.978] 
  5. Aftab Khan, Ashfaq Khan, Mushtaq Khan, Muhammad Uzair (2016) Lossless Image Compression: Application of Bi-level Burrows Wheeler Compression Algorithm (BBWCA) to 2-D Data, Multimedia Tools and Applications [Accepted for publication] [ISI Impact factor 1.346]
  6. Alam Zeb, Mushtaq Khan, Nawar Khan, Adnan Tariq, Liaqat Ali, Farooque Azam ,Syed Husain Imran Jaffery (2016) Hybridization of simulated annealing with genetic algorithm for cell formation problem, The International Journal of Advanced Manufacturing Technology, Volume 86, Issue 5, pp 2243–2254 [Accepted for publication] [ISI Impact factor 1.458]
  7. Khurshid Alam, Edris Hassan, Syed Husain Imran, Mushtaq Khan (2016), In-Vitro Analysis of Forces in Conventional and Ultrasonically Assisted Drilling of Bone, Bio-Medical Materials and Engineering, Vol. 27(1), pp. 101-110 [ ISI Impact factor 1.091] [Published]
  8. Shane Fatima, Mushtaq Khan, Syed Husain Imran Jaffery, Liaqat Ali, Mohammad Mujahid and Shahid Ikramullah Butt  (2016), Optimization of Process Parameters forPlasma Arc Welding (PAW) of Austenitic Stainless Steel (304L) with Low Carbon Steel(A-36), Journal of Materials: Design and Applications (Proceedings of IMechE Part L), Vol. 230(2), pp. 640–653 [ISI Impact factor 0.746] [Published]
  9. Khurshid Alam, Mushtaq Khan, Riaz Muhammad , Sayyad Zahid Qamar and Vadim V. Silberschmidt (2015), In-vitro experimental analysis and numerical study of temperature in bone drilling, Technlogy and Helath Care, Vol 23, Issue 6, 755-783 [ ISI Impact factor 0.697] [Published]
  10. Javeria Hashmi, Mahmood Khan, Mushtaq Khan, Syed Husian ImranI Jaffery, Liaqat Ali, Muhammad Nabeel Anwar and Tayyab Subhani (2015), Evaluation of eddy current signatures for predicting different heat treatment effects in chromium–vanadium (CrV) spring steel, Journal of Materials: Design and Applications (Proceedings of IMechE Part L), [Accepted for Publication] [ISI Impact factor 0.746]
  11. Sadaf Batool, Mushtaq Khan, Syed Husain Imran Jaffery, Ashfaq Khan, Aamir Mubashar, Liaqat Ali, Nawar Khan, Muhammad Nabeel Anwar (2015), Analysis of Weld Characteristics of Micro-Plasma Arc Welding (MPAW) and Tungsten Inert Gas Welding (TIG) of Thin Stainless Steel (304L) Sheets, Journal of Materials: Design and Applications (Proceedings of IMechE Part L), [Accepted for Publication] [ISI Impact factor 0.746]
  12. Muhammad Nabeel Anwar, Muhammad Samran Navid, Mushtaq Khan, Keiichi Kitajo, (2015), A possible correlation between performance IQ, visuomotor adaptation ability and mu suppression, Brain Research, A possible correlation between performance IQ, visuomotor adaptation ability and mu suppressionol. 1603, pp. 84-93 [ISI Impact factor 2.828] [Published]
  13. Saif ur Rehman, Mushtaq Khan, Aamer Nusair Khan, Syed Husain Imran Jaffery, Liaqat Ali, and Aamir Mubashar  (2015), Improvement in the Mechanical Properties of High Temperature Shape Memory Alloy (Ti50Ni25Pd25) by Copper (Cu) Addition, Advances in Materials Science and Engineering, Vol 2015 [ISI Impact factor 0.897] [Published]
  14. Syed Husain Imran Jaffery, Mushtaq Khan, Liaqat Ali and Paul Mativenga (2015), Statistical Analysis of Process Parameters in Micromachining of Ti-6Al-4V Alloy, Journal of Engineering Manufacture, Vol. 230, no. 6, pp.1017-1034. [ISI Impact Factor 0.661] [Published]
  15. Muhammad Khurram, Riaz Ahmad Mufti, Rehan Zahid, Naqash Afzal, Muhammad Usman Bhutta and Mushtaq Khan (2014), Effect of Lubricant Chemistry on the Performance of End Pivoted Roller Follower Valve Train, Tribology International, Vol. 93, pp. 712-722 [ISI Impact Factor 2.124] [Published]
  16. Saif ur Rehman, Mushtaq Khan, A. Nusair Khan, Liaqat Ali, Sabah Zaman, Muhammad Waseem, Liaqat Ali, Syed Husain Imran Jaffery (2014), Transformation behavior and shape memory properties of high temperature shape memory alloy (Ti50Ni15Pd25Cu10 ) at different aging temperatures, Journal Materials Science and Engineering - A: Structural Materials: Properties, Microstructure and Processing, Vol. 619, pp. 171-179 [ISI Impact Factor 2.409] [Published]
  17. Saif ur Rahman, Mushtaq Khan, A. Nusair Khan, M. Imran Khan, Liaqat Ali, Syed Husain Imran Jaffery (2014), Effect of precipitation hardening and thermo-mechanical training on microstructure and shape memory properties of Ti50Ni15Pd25Cu10 High Temperature Shape Memory Alloys, Journal of Alloys and Compounds, Vol. 616, pp. 275-283 [ISI Impact Factor 2.39] [Published]
  18. Syed Husain Imran Jaffery, Mushtaq Khan, Liaqat Ali, Ashfaq Khan, Riaz Ahmad Mufti, Hassan Abbas Khan, Nawar Khan, Syed M Jaffery (2014), The Potential of Solar Powered Transportation and the case for Solar Powered Railway in Pakistan, Renewable and Sustainable Energy Reviews, Vol. 39, pp. 270-276 [ISI Impact Factor 5.627] [Published]
  19. Mushtaq Khan and Phill Dickens (2014), Selective Laser Melting (SLM) of Pure Gold for Manufacturing Dental Crowns, Rapid Prototyping Journal, Vol. 20, Issue 6, pp. 471 479 [ISI Impact Factor 1.023] [Published]
  20. Khurshid Alam, Mushtaq Khan and Vadim V Silberschmidt (2013), 3D Finite-Element Modelling of Drilling Cortical Bone: Temperature Analysis , Journal of Medical and Biological Engineering, Vol 34, Issue 6, pp. 618-623 [ISI Impact factor 0.904] [Published]
  21. Kamran Shah, Andrew J Pinkerton, Izhar Ul Haq, Ashfaq Khan, Mushtaq Khan and Lin Li (2013), Parametric Study of Development of Inconel-Steel Functionally Graded Materials by Laser Direct Metal Deposition, Journal of Materials and Design, Vol. 54, pp. 531-538 [ISI Impact factor 3.171] [Published]
  22. Mushtaq Khan, Nadeem A. Sheikh, Syed H. I. Jaffery, Khurshid Alam, Liaqat Ali (2013), Numerical Simulation of Melt Pool Instability in Selective Laser Melting (SLM) process, Lasers In Engineering, Vol. 28, Issue 5-6, pp. 319-336 [ISI Impact Factor 0.47] [Published]
  23. Jauwairia Nasir, Fahad Islam, Usman Malik, Yasar Ayaz, Osman Hasan, Mushtaq Khan, and Mannan Saeed Muhammad (2013), RRT*-Smart: A rapid convergence implementation of RRT*, International Journal of Advanced Robotic Systems (IJARS), Vol. 10, 299-303 [Published] [ISI Impact Factor 0.375].
  24. Syed Husain Imran Jaffery, Mushtaq Khan, Nadeem Ahmed Skeikh and Paul Mativenga (2013), Wear Mechanism Analysis in Milling of Ti-6Al-4VAlloy, Journal of Engineering Manufacture, Vol. 227, Issue 8, 1148-1156. [Published] [ISI Impact Factor 0.725]
  25. Nawar Khan and Mushtaq Khan (2013), Technology - The Backbone of a Sustainable Growth (SG) & Competitive Integral System Model (CISM), Life Science Journal, Vol. 10, Issue 2, pp. 540-547 [Published] [ISI Impact factor 0.073]
  26. Aamir Iftikhar, Mushtaq Khan, Khurshid Alam, Syed Hussain Imran, Liaqat Ali, Yasar Ayaz and Ashfaq Khan (2013), Turbine Blade Manufacturing through Rapid Tooling (RT) Process and its Quality Inspection, Journal of Materials and Manufacturing Processes, Vol. 28, Issue 5, pp. 534, 538  [Published] [ISI Impact factor 1.02]
  27. Khurshid Alam, Mushtaq Khan and Vadim V Silberschmidt (2013), Analysis of Forces in Conventional and Ultrasonically-Assisted Plane Cutting of Cortical Bone, Proceedings of the Institution of Mechanical Engineers, Part H, Journal of Engineering in Medicine, Vol. 227,Issue 6, pp.636-642. [Published] [ISI Impact factor 1.208] 
  28. Mushtaq Khan and Phill Dickens (2011), Selective Laser Melting (SLM) of Gold (Au), Rapid Prototyping Journal, Vol. 18, Issue 1, pp. 81-94  [Published] [ISI Impact factor 1.023]
  29. Mushtaq Khan and Phill Dickens (2010), Selective Laser Melting (SLM) of Pure Gold, Journal Gold Bulletin, Vol. 43, Issue 2, pp. 114-121 [Published] [ISI Impact factor 3.517]


Non- Impact Factor Journal Publication (s)

  1. Saif ur Rehman, Mushtaq Khan, Syed Husain Imran Jaffery, Liaqat Ali, (2015), Effect of aging on Phase Transition Behavior of Ti50Ni15Pd25Cu10 High Temperature Shape Memory Alloys, Advanced Materials Research, Vol. 1101, pp 177-180 [Non-ISI Journal]
  2. Saif ur Rehman, Mushtaq Khan, Liaqat Ali, Syed Husain Imran Jaffery and Aamir Mubashar  (2015), Effect of Cu addition on microstructure and transformation temperatures of Ti25Ni25Pd25 high temperature shape memory alloys, International Journal of Mechanical and Production Engineering (IJMPE)Volume-3, Issue-6 [Non-ISI Journal]
  3. Syed Husain Imran Jaffery, Shahid Sadiq, Mushtaq Khan, Liaqat Ali, M Nabeel Anwar, Aamir Mubashar (2015), Use of wear map approach in optimization of drilling parameters for petroleum exploration, International Journal of Mechanical and Production Engineering (IJMPE)Volume-3, Issue-6 [Non-ISI Journal]
  4. Sohail Akram, Syed Husain Imran Jaffery, Mushtaq Khan Aamir Mubashar and Liaqat Ali (2015) A numerical investigation of effect of cutting velocity and feed rate on residual stresses in Aluminium Alloy Al-6061, International Journal of Materials, Mechanics and Manufacturing, Vol. 3, Issue. 1, pp 26-30 [Non-ISI Journal] [Published]

Peer-Reviewed International Conference Publication (s)

  1. Syed Husain Imran Jaffery, Liaqat Ali, Mushtaq Khan, Hamza Musaddiq Qureshi, Misbahullah Khan, Zeeshan Ahsan (2015), Development and Testing of a Solar Cell Test Chamber for Performance Evaluation of Solar Cells, 50th International Universities Power Engineering Conference (UPEC 2015), At Stoke on Trent, UK, 1-4 September.
  2. Alam Zeb, Mushtaq Khan, Adnan Tariq, Nawar Khan, Liaqat Ali, Farooque Azam, Syed Husain Imran Jaffery (2015), A Comparison of Genetic Algorithm with Simulated Annealing for Cell Formation Problem, International Conference on Science, Technology and Management(ICSTM), London, United Kingdom August 30th 2015.
  3. Zahidfaraz, Liaqat Ali, Syed Waheedulhaq, Mushtaq Khan, Syed Husain Imran Jaffery (2015), STEP-NC Enabled Manufacturing Process Planning of Sheet Metal Bend Parts, International conference on Engineering and Natural Science (ICENS) London, United Kingdom August 30th, 2015.
  4. Syed Husain Imran Jaffery, Shahid Sadiq, Mushtaq Khan, Liaqat Ali, M Nabeel Anwar, Aamir Mubashar (2015), Use of wear map approach in optimization of drilling parameters for petroleum exploration, International Conference on Engineering and Natural Science (ICENS) London, United Kingdom 18th April.
  5. Liaqat Ali, Muhammad Asim Zahir, Aiman Rashid, Mushtaq Khan, Syed Husain Imran Jaffery, Aamir Mubashar, M Nabeel Anwar (2015), Finite Element Analysis of Knee Implant for Orthopaedic Applications, International Conference on Medical, Biological and Pharmaceutical Sciences (ICMBPS) London, United Kingdom 18th April.
  6. Saifur Rehman, Mushtaq Khan, Liaqat Ali Syed Husain Imran Jaffery, Aamir Mubashar (2015), Effect of Cu addition on microstructure and transformation temperatures of Ti25Ni25Pd25 high temperature shape memory alloys, International Conference on Mechanical, Aeronautics and Production Engineering (ICMAPE) London, United Kingdom 20th April.
  7. Saif ur Rehman, Mushtaq Khan, Syed Husain Imran Jaffery, Liaqat Ali, (2015), Effect of aging on Phase Transition Behavior of Ti50Ni15Pd25Cu10 High Temperature Shape Memory Alloys, Proceedings of the 3rd International Conference on Nano and Materials Science, Jan 24-26, Zhuhai, China.
  8. Saif ur Rehman, Mushtaq Khan, Aamer Nusair Khan, Liaqat Ali, Syed Husain Imran Jaffery, (2014), Two-step martensitic transformation in an aged Ti50Ni15Pd25Cu10 High Temperature Shape Memory Alloys, Proceedings of the International Conference on Computational and Experimental Science and Engineering (ICCESEN-2014), Oct 25-29, Antalya, Turkey.
  9. Sohail Akram, Syed Husain Imran Jaffery, Mushtaq Khan Aamir Mubashar and Liaqat Ali (2014) A numerical investigation of effect of cutting velocity and feed rate on residual stresses in Aluminium Alloy Al-6061, Proceedings of 3rd International Conference on Advances in Soft Computing (ICASC 2014), May 29-30, Sydney Australia 
  10. Ashfaq Khan, Muhammad Alam Zaib Khan, Kamran Shah, Aftab Khan, Mushtaq Khan, Syed Husain Imran Jaffery, Mohammad. A Sheikh, Lin. Li (2014), Laser Micro Processing Of Carbide Tool Insert, Proceedings of the ASME 2014 Manufacturing Science and Engineering Conference (MSEC 2014), June 9-13, 2014, Detroit, Michigan, USA.
  11. Shane Fatima, Mushtaq Khan, Syed Husain Imran Jaffery (2014), Optimization of Process Parameters of Austenitic Stainless Steel 304L with Low Carbon Steel A-36 by using Plasma Arc Welding (PAW).International Symposium on Metallurgy and Welding Technology 2014 (ISMWT 2014), The International Materials Technology Conference and Exhibition (IMTCE 2014), 14th – 15th May 2014, Putra World Trade Centre, Kuala Lumpur, Malaysia
  12. Muhammad Jamshaid, Husain Imran Syed Jaffery, Liaqat Ali, Mushtaq Khan, Khurshid Alam, Riaz Ahmed and Masood Ur Rehman (2013), Statistical Analysis of the Efect of Machining Parameters on Fatigue Life of Aerospace Grade Aluminum Alloy (AL 6082T6), Proceedings of the 11th International Conference on Manufacturing Research (ICMR2013), 19-20 Sept, Cranfield, UK
  13. Waseem Tahir, Syed Husain Imran Jaffery, Liaqat Ali, Mushtaq Khan (2013), Optimization And Analysis Of Cutting Parameters Using Cryogenic Media In Machining Of Alloy Steel (D406a), Proceedings of the 11th International Conference on Manufacturing Research (ICMR2013), 19-20 Sept, 2013, Cranfield, UK
  14. Michael Vogel, Mushtaq Khan, Juansethi Ibarra-Medina, Andrew J Pinkerton, Narcisse N’Dri, Mustafa Megahed (2013), A Coupled Approach to Weld Pool, Phase and Residual Stress Modelling of Laser Direct Metal Deposition (LDMD) Processes, Proceedings of 2nd World Congress on Integrated Computational Materials Engineering (ICME), The Minerals, Metals & Materials Society (TMMMS), 7-11 July, Salt Lake Marriott Downtown at City Creek, Salt Lake City, Utah, USA, Wiley-TMS, ISBN: 978-1118766897.
  15. Michael Vogel, Mushtaq Khan, Juansethi Ibarra-Medina, Andrew J Pinkerton, Narcisse N’Dri, Mustafa Megahed (2012), A Verified Model of Transient and Residual Stresses in Laser Direct Metal Deposition, Proceeding of 31st International Congress on Applications of  Lasers and Electro-Optics (ICALEO), 23-27 September, Anaheim, CA, USA, ISBN: 978-0-912035-94-9.
  16. Mushtaq Khan, Michael Vogel, Juansethi Ibarra-Medina, Andrew J Pinkerton, Narcisse N’Dri, Mustafa Megahed (2012), Analysis and Simulation of the Effect of the Melt Pool Flow During Laser Deposition of a Multiphase Material, Proceeding of 31st International Congress on Applications of  Lasers and Electro-Optics (ICALEO), 23-27 September, Anaheim, CA, USA, ISBN: 978-0-912035-94-9.
  17. Hassan A. Khan, Syed H. I. Jaffery, Mushtaq Khan and Liaqat Ali (2012), Design of an Environmental Chamber for Testing of Photovoltaic Devices, Proceeding of World Renewable Energy Conference (WREC), Denver, Colodaro, USA, May 13-17, ISBN: 978-1-622760-92-3.
  18. Syed H. I. Jaffery, Hassan A. Khan, Mushtaq Khan and Sarfaraz Ali (2012), A study on the feasibility of solar powered railway system for light weight urban transport, Proceeding of World Renewable Energy Conference (WREC), Denver, Colodaro, USA, May 13-17, ISBN: 978-1-622760-92-3.
  19. Aamir Iftikhar , Mushtaq Khan, Khurshid Alam, Asim Nisar, Syed Hussain Imran, Yasar Ayaz (2012), Turbine blade manufacturing through Rapid Tooling (RT) process and its quality inspection, 37th MATADOR Conference, 25-27th July, The University of Manchester, Manchester, UK, ISBN: 978-1447144793.
  20. Liaqat Ali, Mushtaq Khan, Syed H. I. Jaffery, Khurshid Alam, Mohammad Nabeel Anwar (2012), A Generalized Featured-Based inspection framework for dimensional inspection of individual machined Parts, 37th MATADOR Conference, 25-27th July, The University of Manchester, Manchester, UK, ISBN: 978-1447144793.
  21. Nadeem A Sheikh, Mushtaq Khan, Khurshid Alam, Syed H. I. Jaffery, Ashfaq Khan, Liaqat Ali (2012), Balling Phenomena in Selective Laser Melting (SLM) of Pure Gold (Au), 37th MATADOR Conference, 25-27th July, The University of Manchester, Manchester, UK, ISBN: 978-1447144793.
  22. Mushtaq Khan, Nawar Khan, Ashfaq Khan and Aftab Khan (2012), Rapid Prototyping (RP) Technology Networking and Diffusion Management through a National Strategy Formulation, IEEE - International Conference on Engineering Management (ICEM), Mar 21-22, College of Electrical and Mechanical Engineering (EME), National University of Sciences and Technology (NUST), Rawalpindi, Pakistan
  23. Aftab Khan, Ashfaq Khan, Mushtaq Khan, Nawar Khan (2012), Quality Assessment Techniques in Image Processing, IEEE - International Conference on Engineering Management (ICEM), Mar 21-22, College of Electrical and Mechanical Engineering (EME), National University of Sciences and Technology (NUST), Rawalpindi, Pakistan
  24. Ashfaq Khan, Mushtaq Khan, Nawar Khan, Aftab Khan (2012), Management of Nanotechnologies: Challenges and Opportunities, IEEE - International Conference on Engineering Management (ICEM), Mar 21-22, College of Electrical and Mechanical Engineering (EME), National University of Sciences and Technology (NUST), Rawalpindi, Pakistan
  25. Alam Zeb, Adnan Tariq, Mushtaq Khan, Nawar Khan (2012), Development of Production Planning and Control (PPC) Activities Frame work for Virtual Manufacturing Cell in a Job Shop Environment, IEEE - International Conference on Engineering Management (ICEM), Mar 21-22, College of Electrical and Mechanical Engineering (EME), National University of Sciences and Technology (NUST), Rawalpindi, Pakistan
  26. Alam Zeb, Aamer A. Baqai and Mushtaq Khan (2011), Reconfigurable Manufacturing System  Scalability Model for Volume and Variety, IEEE- International Conference on Advanced Modeling and Simulation (ICAMS), Nov 28-30, College of Electrical and Mechanical Engineering (EME), National University of Sciences and Technology (NUST), Rawalpindi, Pakistan 
  27. Khurshid Alam, Mushtaq Khan and Vadim V. Silberschmidt (2010), Experimental and Numerical Analysis of Cracking Behaviour in Cortical Bone Under Tool Penetration, The 20th International Workshop on Computational Mechanics of Materials (IWCMM 20), 8-11 September, Loughborough University, UK.
  28. Mushtaq Khan and Phill Dickens (2009), Selective Laser Melting (SLM) of 24 Carat Gold (Au), The 5th international conference on gold science, technology and its applications, 26 - 29 July, Heidelberg, Germany
  29. M. Khan and P. Dickens (2008), Processing Parameters for Selective laser Melting (SLM) of Gold, The Proceedings of 19th International Solid Freeform Fabrication Symposium, pp. 278-289 , 4-6 August, Texas, USA
  30. Mushtaq Khan and Nawar Khan (2007), Digital Manufacturing- A New Approach to Design Innovation and Flexible Manufacturing, 2nd Tehran International Congress on Manufacturing Engineering (TICME), 10-13 December, Tehran, Iran.
  31. Nawar Khan, Mushtaq Khan and Mohammad Akhtar (2007), Approaches for Technology Assessment and Selection for Developing Countries – TOT model, 2nd Tehran International Congress on Manufacturing Engineering, 10-13 December, Tehran, Iran.
  32. Nawar Khan and Mushtaq Khan (2003), Integral Lean Management, The Proceeding of International Workshop on Application of Emerging Technology in Manufacturing Engineering, pp. 105-120, Islamabad, 10– 12 July,  Pakistan.

Teaching Interests 
  • Additive/ Rapid Manufacturing Technologies
  • Advanced Manufacturing Technologies
  • Laser Material Processing
  • Manufacturing Processes
Instructor in Professional Courses
  • Organized and conducted a 3 weeks course on “Pro/Engineer Wildfire 5 and CNC Machining with Integrated Pro/Manufacturing” June-July 2011. Venue: NUST SMME.
  • Organized and conducted a 4 days short course on “Pro/Engineer Wildfire 5 - Advanced part modelling”. Venue: NUST SMME.
Subjects (Undergraduate)
  • Engineering Drawing and Graphics using AutoCAD
  • Mechanics of Materials
  • Manufacturing Processes
  • Machine Design
  • Computer Aided Design and Computer Aided Manufacturing (CAD/CAM)
 
Subjects (Postgraduate)
  • Laser Material Processing
  • Product Design and Development
  • Rapid Prototyping, Tooling and Manufacturing
1.Worked in collaboration with ARGEN Corporation USA during PhD for 02 years.
2.Worked in collaboration with ESI Group Germany as Research Fellow for 01 year.