Skip Ribbon Commands
Skip to main content
Dr Syed Husain Imran
Assistant Professor
Department of Design and Manufacturing Engineering

SMME
National University of Sciences and Technology (NUST)
H-12, NUST HQ, Islamabad
Tel : +925190856027

Specialization
Industrial Engineering and Digital Manufacturing

Education
PhD (Manufacturing), University of Manchester, UK

EXPERIENCE:

National University of Sciences and Technology 
Assistant Professor Oct 2010 to date (School of Mechanical and Manufacturing Engineering) 

University of Manchester
Teaching Assistant Oct. 2006 to Aug. 2010
 
ONETEN ENGINEERING Services, Islamabad, Pakistan
Design and Manufacturing 2001 to 2006
   
Tri Pack Films Limited, Hattar, Pakistan     
Internship 2000

PROFESSIONAL ACTIVITIES:

  • Member Pakistan Engineering Council. 
  • Member Institute of Engineers Pakistan. 
  • Reviewer  for the International Journal of Advanced Manufacturing Technology. 
  • Reviewer  for the Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
  • Reviewer  for the Renewable and Sustainable Energy Reviews Journal.
  • Reviewer  for the Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
  • Reviewer for Journal of Zhejiang University SCIENCE A.
  • Reviewer for the International Journal of Engineering Research.

RESEARCH INTERESTS:

  • Identification and optimization tool performance parameters.
  • Optimization of operating parameters for oil drill operating in hard rocks.
  • Investigation of tool/workpiece interactions for the development of improved tooling.
  • Research into the environmental aspects of industrial processes.​

 List of Publications

  1. Saif ur Rehman, Mushtaq Khan, A.Nusair Khan, Khurshid Alam, Syed Husain Imran Jaffery, Liaqat Ali, Ashfaq Khan (2017), Influence of Cu addition on transformation temperatures and thermal stability of TiNiPd high temperature shape memory alloys, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. [ISI Impact factor 0.793] [Accepted for publication]
  2. Warsi, Salman; Jaffery, Syed; Ahmad, Riaz; Khan, Mushtaq; Ali, Liaqat, Agha Mujtaba, Akram, Sohail (2017), Development of energy consumption map for orthogonal machining of Al 6061-T6 alloy, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture [ISI Impact factor 0.978] [Accepted for publication]
  3. Azam, A., Mubashar, A., Uddin, E., Ashcroft, I. and S Jaffery. (2017) A Numerical Study of the Effect of Ply-Layup on the Strength and Stiffness of a Composite T-Joint under Three Point Bending. Journal of Adhesion Science and Technology (accepted for publication).
  4. Alam, K., Hassan, E., S. H. Imran Jaffery, & Khan, M. (2016). In-vitro analysis of forces in conventional and ultrasonically assisted drilling of bone. Bio-medical materials and engineering, 27(1), 101-110.
  5. Alamzeb et al, (2015).Hybridization of Simulated Annealing with Genetic Algorithm for Cell Formation Problem. The International Journal of Advanced Manufacturing Technology, [accepted for publication]
  6. Hashmi, J., Khan, M., Khan, M., Jaffery, S. H. I., Ali, L., Anwar, M. N., &Subhani, T. (2015). Evaluation of eddy current signatures for predicting different heat treatment effects in chromium–vanadium (CrV) spring steel. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, [Article in Press, DOI: 10.1177/1464420715595432].
  7. Batool, S., Khan, M., Jaffery, S. H. I., Khan, A., Mubashar A., Ali. L. andAnwar, N., (2015) Analysis of Weld Characteristics of Micro-Plasma Arc Welding (MPAW) and Tungsten Inert Gas Welding (TIG) of Thin Stainless Steel (304L) Sheets), Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, [Article in Press, DOI: 10.1177/1464420715592438]
  8. Fatima, S., Khan, M., Jaffery, S. H. I., Ali, L., Mujahid, M., & Butt, S. I. (2015). Optimization of process parameters for plasma arc welding of austenitic stainless steel (304 L) with low carbon steel (A-36). Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications,[Article in Press, (DOI: 10.1177/1464420715584392)]
  9. Syed Husain Imran Jaffery, Mushtaq Khan, Liaqat Ali and Paul Mativenga (2015), Statistical Analysis of Process Parameters in Micromachining of Ti-6Al-4V Alloy, Journal of Engineering Manufacture, [Article in Press (DOI: 10.1177/0954405414564409)]
  10. Jaffery, Syed H Imran; Ali, Liaqat; Khan, Mushtaq; Qureshi, Hamza Musaddiq; Khan, Misbahullah; Ahsan, Zeeshan; Khan, Hassan Abbas, "Development and testing of a solar cell test chamber for performance evaluation of solar cells," in Power Engineering Conference (UPEC), 2015 50th International Universities 1-4 Sept. 2015 [doi: 10.1109/UPEC.2015.7339867]
  11. Alam Zeb, Mushtaq Khan, Adnan Tariq, Nawar Khan, Liaqat Ali, FarooqueAzam, Syed Husain Imran Jaffery (2015), A Comparison of Genetic Algorithm with Simulated Annealing for Cell Formation Problem, International Conference on Science, Technology and Management(ICSTM), London, United Kingdom August 30th 2015.
  12. ZahidFaraz, Liaqat Ali, Syed Waheedulhaq, Mushtaq Khan, Syed Husain Imran Jaffery (2015), STEP-NC Enabled Manufacturing Process Planning of Sheet Metal Bend Parts, International conference on Engineering and Natural Science (ICENS) London, United Kingdom August 30th, 2015.
  13. Syed Husain Imran Jaffery, Shahid Sadiq, Mushtaq Khan, Liaqat Ali, M Nabeel Anwar and AamirMubashar “Use of wear map approach in optimization of drilling parameters for petroleum exploration”,International Journal of Mechanical and Production Engineering (IJMPE), Volume-3,Issue-6
  14. Syed Husain Imran Jaffery, Shahid Sadiq, Mushtaq Khan, Liaqat Ali, M Nabeel Anwar , AamirMubashar“Use of wear map approach in optimization of drilling parameters for petroleum exploration”,International Conference on Engineering and Natural Science (ICENS) London, United Kingdom 18th April 2015 
  15. Liaqat Ali, Muhammad AsimZahir, Aiman Rashid, Mushtaq Khan, Syed Husain Imran Jaffery, AamirMubashar, M Nabeel Anwar “Finite Element Analysis of Knee Implant for Orthopaedic Applications” International Conference on Medical, Biological and Pharmaceutical Sciences (ICMBPS) London, United Kingdom 18th April 2015 
  16. Mushtaq Khan, SaifurRehman, Liaqat Ali Syed Husain Imran Jaffery, AamirMubashar, “Effect of Cu addition on microstructure and transformation temperatures of Ti25Ni25Pd25 high temperature shape memory alloys” International Conference on Mechanical, Aeronautics and Production Engineering (ICMAPE) London, United Kingdom 20th April 2015 
  17. Saif ur Rehman, Mushtaq Khan, AamerNusair Khan, Syed Husain Imran Jaffery, Liaqat Ali, and AamirMubashar  (2015), Improvement in the Mechanical Properties of High Temperature Shape Memory Alloy (Ti25Ni25Pd25) by Copper (Cu) Addition, Advances in Materials Science and Engineering, [Article In Press] 
  18. Saif ur Rehman, Mushtaq Khan, Syed Husain Imran Jaffery, Liaqat Ali, (2015), Effect of aging on Phase Transition Behavior of Ti50Ni15Pd25Cu10 High Temperature Shape Memory Alloys, Advanced Materials Research, Vol. 1101, pp 177-180]
  19. Akram, S., Jaffery, S. H. I., Khan, M., Mubashar, A., & L. Ali. A (2015) Numerical Investigation of Effects of Cutting Velocity and Feed Rate on Residual Stresses in Aluminum Alloy Al-6061, International Journal of Materials, Mechanics and Manufacturing, Vol. 3, (1): 26-30
  20. Saif ur Rehman, Mushtaq Khan, Syed Husain Imran Jaffery, Liaqat Ali, (2015), Effect of aging on Phase Transition Behavior of Ti50Ni15Pd25Cu10 High Temperature Shape Memory Alloys, Proceedings of the 3rd International Conference on Nano and Materials Science, Jan 24-26, Zhuhai, China.
  21. Rehman S, Khan M, Nusair Khan A, Ali L, Zaman S, Waseem M, Ali L, & S H I Jaffery (2014). Transformation behavior and shape memory properties of Ti50Ni15Pd25Cu10 high temperature shape memory alloy at various aging temperatures. Materials Science and Engineering: A. 2014;619(0):171-9.
  22. Jaffery, S. H. I., et. al. (2014). The potential of solar powered transportation and the case for solar powered railway in Pakistan. Renewable and Sustainable Energy Reviews, 39, 270-276.
  23. Rehman S, Khan, M., Nusair Khan, A., Imran Khan, M., Ali, L., & S H I Jaffery (2014). Effect of precipitation hardening and thermomechanical training on microstructure and shape memory properties of Ti50Ni15Pd25Cu10 High Temperature Shape Memory Alloys. Journal of Alloys and Compounds. 616(0): 275-283.
  24. Saif ur Rehman, Mushtaq Khan, AamerNusair Khan, Liaqat Ali, Syed Husain Imran Jaffery, (2014), Two-step martensitic transformation in an aged Ti50Ni15Pd25Cu10 High Temperature Shape Memory Alloys, Proceedings of the International Conference on Computational and Experimental Science and Engineering (ICCESEN-2014), Oct 25-29, Antalya, Turkey.
  25. SohailAkram, Syed Husain Imran Jaffery, Mushtaq Khan AamirMubashar and Liaqat Ali (2014) A numerical investigation of effect of cutting velocity and feed rate on residual stresses in Aluminium Alloy Al-6061, Proceedings of 3rd International Conference on Advances in Soft Computing (ICASC 2014), May 29-30, Sydney Australia 
  26. Ashfaq Khan, Muhammad Alam Zaib Khan, Kamran Shah, Aftab Khan, Mushtaq Khan, Syed Husain Imran Jaffery, Mohammad. A Sheikh, Lin. Li (2014), Laser Micro Processing Of Carbide Tool Insert, Proceedings of the ASME 2014 Manufacturing Science and Engineering Conference (MSEC 2014), June 9-13, 2014, Detroit, Michigan, USA.
  27. Shane Fatima, Mushtaq Khan, Syed Husain Imran Jaffery (2014), Optimization of Process Parameters of Austenitic Stainless Steel 304L with Low Carbon Steel A-36 by using Plasma Arc Welding (PAW).International Symposium on Metallurgy and Welding Technology 2014 (ISMWT 2014), The International Materials Technology Conference and Exhibition (IMTCE 2014), 14th – 15th May 2014, Putra World Trade Centre, Kuala Lumpur, Malaysia
  28. Arooj, S., Shah, M., Sadiq, S., Jaffery, S. H. I., &Khushnood, S. (2014). Effect of Current in the EDM Machining of Aluminum 6061 T6 and its Effect on the Surface Morphology. Arabian Journal for Science and Engineering, 39(5), 4187-4199. 
  29. Tahir, W., S H I Jaffery, L Ali, M. Khan, S. Butt, S. M. Jaffery, Optimization and Analysis of Cutting Parameters Using Cryogenic Media in Machining of High Strength Alloy Steel. Accepted for publication in the Proceedings of the 11th International Conference on Manufacturing Research (ICMR2013), Cranfield, UK, 19-20 September 2013.
  30. Jamshaid, M., S H I Jaffery, M. Khan, L Ali, K. Alam, R. Ahmed, M. R. Shah,  Statistical Analysis of the Effect of Machining Parameters on Fatigue Life of Aerospace Grade Aluminium Alloy (Al 6082T6). Accepted for publication in the Proceedings of the 11th International Conference on Manufacturing Research (ICMR2013), Cranfield, UK, 19-20 September 2013.
  31. Sheikh, N. A., Khan M., Alam, K., Jaffery, H. I. S., Khan, A., & A. Ali (2014). Numerical Simulation of Melt Pool Instability in Selective Laser Melting (SLM) Process. Lasers in Engineering, 37th MATADOR Special Issue Papers for Lasers in Engineering, 28, 319-336.
  32. Jaffery, S. H. I., Khan, M., Sheikh, N. A., &Mativenga, P. (2013). Wear mechanism analysis in milling of Ti-6Al-4V alloy. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227(8), 1148-1156.
  33. Iftikhar, A., Khan, M., Alam, K., Jaffery, S. H.I., Ali, L., Ayaz, Y., & Khan, A. (2013). Turbine blade manufacturing through Rapid Tooling (RT) process and its quality inspection. Materials and Manufacturing Processes, 28(5), 534-538. 
  34. Sadiq,S, M. Khan and S. I. Jaffery.: Design and modeling of pin on disk Apparatus for the development of tools for  rock drilling. Presented at the 2nd International Symposium on Frontiers of Computational Sciences (ISFCS2012), Islamabad, Pakistan, 28-29 June, 2012.
  35. Sheikh, N. A., M Khan, K. Alam, H. I. S.  Jaffery, A. Khan  and L.  Ali.: Balling phenomena in Selective Laser Melting (SLM) of pure Gold (Au). Proceedings of the 37th Intl. MATADOR Conference, Manchester, UK, 21-23 July, 2012 (Springer: ISBN 9781447144793).
  36. Ali, L., M Khan, S. I.  Jaffery, K Alam and M.  N. Anwar.: A Generalised Featured-Based inspection framework for dimensional inspection of individual machined Parts. Proceedings of the 37th Intl. MATADOR Conference, Manchester, UK, 21-23 July, 2012 (Springer: ISBN 9781447144793). 
  37. Iftikhar, A., M. Khan, A Nisar, S. I. Jaffery, Y. Ayaz: Turbine blade manufacturing through Rapid Tooling (RT) process and its quality inspection. Proceedings of the 37th International MATADOR Conference, Manchester UK, 21-23 July, 2012 (Springer: ISBN 9781447144793).
  38. Khan H. A., Jaffery, S.I., Khan M., and Ali L., Design of an environmental chamber for testing of photovoltaic devices. Proceedings of the World Renewable Energy Forum (WREF-2012), Denver, CO, USA, 13-17 May 2012 (ISBN 9781622760923).
  39. Jaffery, S.I., Khan M., Khan Hassan A and Ali S., A study on the feasibility of solar powered railway system for lightweight urban transport. Proceedings of the World Renewable Energy Forum (WREF-2012), Denver, CO, USA, 13-17 May 2012 (ISBN 9781622760923).
  40. Jaffery, S. H. I., &Mativenga, P. T. (2012). Wear mechanisms analysis for turning Ti-6Al-4V—towards the development of suitable tool coatings. The International Journal of Advanced Manufacturing Technology, 58(5-8), 479-493. 
  41. Jaffery, S.I., N. Driver and P.T. Mativenga, Analysis of process parameters in micromachining of titanium alloys. Proceedings of the 36th Intl. MATADOR Conference, Manchester, July 2010, 21-23 July, 2012 (Springer: ISBN 9781849964319).
  42. Rajemi, M. F., Mativenga, P. T., & Jaffery, S. I. (2009). Energy and carbon footprint analysis for machining titanium Ti-6Al-4V Alloy. Journal of Machine Engineering, 9(1), 103-112. 
  43. Jaffery, S. I. and P.T. Mativenga, The use of wear maps to characterise tool-workpiece interactions. PGR conference, Manchester, 2009.
  44. Rajemi M F, Mativenga P T, Jaffery S I, Energy and carbon footprint analyis for machining titanium Ti-6Al-4V alloy. Proceedings of CIRP XX Conference on Supervising and Diagnostics of Machining Systems. ; 16 Mar 2009-19 Mar 2009; Poland, 2009.
  45. Jaffery, S. I., &Mativenga, P. T. (2009). Study of the use of wear maps for assessing machining performance. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223(9), 1097-1105.
  46. Jaffery, S. I., &Mativenga, P. T. (2009). Assessment of the machinability of Ti-6Al-4V alloy using the wear map approach. The International Journal of Advanced Manufacturing Technology, 40(7-8), 687-696.