Skip Ribbon Commands
Skip to main content
 
Research paper

2015:

  • Tensile Behavior of Unidirectional Carbon/Epoxy Composites for Aerospace Structures Subjected to Varying Strain Rates    Khan, H. A., Nigar, M and Chaudhry, I. A
  • Object-oriented case representation for CBR application in structural analysis    Khan, A. A. and Chaudhry, I. A
  • Finite element analysis of mechanical properties of woven composites through a micromechanics model    Khan, H. A., Hassan, A., Saeed, B. Mazhar, F. and Chaudhry, I. A
  • Interpolatory model reduction for quadratic bilinear descriptor systems    Mian Ilyas Ahmad, Lihong Feng, and Peter Benner    View details
  • Krylov Subspace-based Model Reduction for a Class of Bilinear Descriptor Systems    Pawan Goyal, Mian Ilyas Ahmad, and Peter Benner
  • Moment-Matching based Model Reduction for Stokes-Type Quadratic-Bilinear Descriptor Systems    Mian Ilyas Ahmad, Peter Benner, Pawan Goyal, and Jan Heiland
  • Implicit Volterra Series Interpolation for Model Reduction of Bilinear Systems    Mian Ilyas Ahmad, Ulrike Baur, and Peter Benner
  • Model Reduction of Quadratic-Bilinear Descriptor Systems via Carleman Bilinearization    Pawan Goyal, Mian Ilyas Ahmad, and Peter Benner
  •  

    2014:

  • Genetic Algorithm to minimize flowtime in a no-wait flowshop scheduling problem    Chaudhry, I. A., Ahmed, R and Khan, A. M
  • Preliminary Aircraft Design Optimization Using Genetic Algorithms    Chaudhry, I. A. and Ahmed, A
  • Case Based Reasoning Support for Adaptive Finite Element Analysis: Mesh Selection for an Integrated System    Khan, A. A., Chaudhry, I. A. and Sarosh, A
  • Ship Trim Optimization: Assessment of Influence of Trim on Resistance of MOERI Container Ship    Salma Sherbaz and Wenyang Duan
  • Calculation of Effect of Viscous and Pressure Forces on Trimming Moments    Salma Sherbaz and Wenyang Duan
  • Interpolatory Model Reduction Techniques for Linear Second-Order Descriptor Systems    Mian Ilyas Ahmad and Peter Benner
  • 2013:

  • Parametric studies & performance analysis of a biplane micro air vehicle    Adnan Maqsood, Tiauw Hiong Go
  • Dynamic Stall Control through Passive Devices in Hybrid Configuration    M.N. Mumtaz, A. Shahzad, H.R. Hamdani and K.Parvez
  • Overview of Low Reynolds number flight from Earth to Mars    Adnan Maqsood
  • Higher Education revolution in Pakistan     Ahmed Ejaz Nadeem
  • On Using Neural Networks in UAV Structural Design for CFD Data Fitting and Classification    Mazhar, F, Khan, A. M., Chaudhry, I. A. and Ahsan, M
  • CFD Simulation for Resistance Calculation of DTMB 5415 Combatant Hull    Jawad Khan, Salma Sherbaz, and Nasir Mehmood   
  • CFD Simulation of Diffuser for Improving Propeller Efficiency    Nasir Mehmood, Zhang Liang, Jawad Khan and Salma Sherbaz
  • Preconditioned multishift BiCG for H2-optimal model reduction    Mian Ilyas Ahmad, Daniel B. Szyld, and Martin B. van Gijzen
  •  

    2012:

     
  • SIMULATION OF FIRST MODE CRACK PROPAGATION IN A VISCOELASTIC SOLID SYTEM FUEL STRUCTURE USING CRACK LENGTH-TEMPERATURE SUPERIMPOSITION 3rd International Conference on Manufacturing Science & Engineering (ICMSE 12) Xiamen, China Muhammad Omair, Khalid Parvez, Muhammad Azam
  • STUDYING THE PERFORMANCE OF TRANSONIC AXIAL FLOW COMPRESSORS BY IMPLEMENTING CIRCUMFERENTIAL GROOVES, TIP RECESS AND TIP INJECTION 50th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Exposition, Nashville, USA Junaid Ahmad Khan, Ammar Mushtaq, Khalid Parvez, Sijal Ahmad
  • FLOW CONTROLLING ON LOW PRESSURE TURBINE USING PASSIVE METHODS 9th International Bhurban Conference on Applied Sciences & Technology (IBCAST 12), Pakistan Muhammad Aqib Chishty, Hossein Raza Hamdani, Khalid Parvez
  • PARAMETRIC STUDY OF SWEEPING CORRUGATED WING AND ROLE OF SPANWISE FLOW IN DELAYED STALL 9th International Bhurban Conference on Applied Sciences & Technology (IBCAST 12), Pakistan Aamer Shahzad, Hossein Raza Hamdani, Khalid Parvez, M. Nafees Mumtaz
  • 2011:

     
  • COMPARISON OF PASSIVE DEVICES FOR FLOW CONTROLLING ON LOW PRESSURE TURBINE CASCADE International Conference on Advanced modeling and Simulation (ICAMS 11), CEME NUST, Pakistan Muhammad Aqib Chishty, Hossein Raza Hamdani, Khalid Parvez
  • EFFECT OF POSITIONING OF LEADING EDGE VORTEX GENERATORS ON DYNAMIC STALL PHENOMENON International Conference on Advanced modeling and Simulation (ICAMS 11), CEME NUST, Pakistan, M. Nafees Mumtaz, Hossein Raza Hamdani, Khalid Parvez, Aamer Shahzad
  • TWO PHASE FLOW ANALYSIS IN A CONVERGING DIVERGING JET NOZZLE International Conference on Advanced modeling and Simulation (ICAMS 11), CEME NUST, Pakistan, Faiza Uzma, Khalid Parvez, Ansar Yasmin
  • DESIGN OF SOLID PROPELLANT GRAIN FOR BOOST-SUSTAIN-BOOST ROCKET MOTOR PROFILE International Conference on Advanced modeling and Simulation (ICAMS 11), CEME NUST, Pakistan, Ansar Yasmin, Khalid Parvez, Faiza Uzma
  • TRANSITION PREDICTION IN LPT USING GAMMA THETA MODEL & PASSIVE CONTROL OF SEPARATION ASME International Mechanical Engineering Congress & Exposition (IMECE 11), Colorado, USA, Muhammad Aqib Chishty, Khalid Parvez, Sijal Ahmed, Hossein Raza Hamdani, Ammar Mushtaq.
  • OPTIMIZATION OF FUEL ECONOMY BY DRAG REDUCTION OF PAKISTANI BEDFORD TRUCK International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE-11), Malaysia Sulman Aziz, Khalid Parvez, Sijal Ahmad, Junaid Ahmad Khan.
  • CFD STUDY OF BLOOD FLOW AROUND PLAQUES OF DIFFERENT SHAPES IN HUMAN CAROTID ARTERY IEEE 3rd International Conference on Bioinformatics and Biomedical Technology, (ICBBT-11), China Rana Usman Ali, Absaar Ul Jabbar, Umar Khan Niazi, Khalid Parvez, Sijal Ahmed.
  • EFFECT OF CIRCUMFERENTIAL GROOVES AND TIP RECESS ON STALL CHARACTERISTICS OF TRANSONIC AXIAL COMPRESSOR ROTOR 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, USA Junaid Ahmad Khan, Khalid Parvez, Sijal Ahmad, Ammar Mushtaq
  • PARAMETRIC STUDY OF TIP INJECTION ON THE STABILITY OF TRANSONIC AXIAL FLOW COMPRESSOR 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, USA Ammar Mushtaq, Khalid Parvez, Sijal Ahmad, Junaid Ahmad Khan
  • 2010:

     
  • WORKSPACE AND SINGULARITY ANALYSIS OF A PKM USING MONTE CARLO METHOD, IEEE International Conference on Intelligence and Information Technology (ICIIT-10), Lahore, Pakistan , Saleh Bin Tariq, Khalid Ameer Chughtai, Khalid Parvez, Sikandar Hayat.
  • VALIDATION OF NORMAL AND FRICTIONAL CONTACT MODELS OF SPHERICAL BODIES BY FEM ANALYSIS International Journal of Multiphysics, Volume 4, Number 2, July 2010, Hassan Abbas Khawaja, Khalid Parvez
  • DIRECT SIMULATION MONTE CARLO (DSMC) ALGORITHM: A COMPARISON OF MATHEMATICA CODE WITH FLUENT 6.2 FOR LOW KNUDSEN NUMBER, WASET International Conference on Fluid Mechanics (ICFM-10), Naarden, Netherlands, Nabeel Ahmed Qazi, Absaar ul Jabbar, Khalid Parvez
  • WORKSPACE AND SINGULARITY ANALYSIS OF A PKM USING MONTE CARLO METHOD, IEEE International Conference on Intelligence and Information Technology (ICIIT-10), Lahore, Pakistan , Saleh Bin Tariq, Khalid Ameer Chughtai, Khalid Parvez, Sikandar Hayat
  • 2009:

     
  • OPTIMIZATION OF ELSTOMERIC MICRO-FLUIDIC VALVE DIMENSIONS USING NON-LINEAR FINITE ELEMENT METHODS, International Journal of Multiphysics, Volume 3, Number2,June2009, Hassan Abbas Khawaja, Imran Raouf, Khalid Parvez, A. Scherer
  • 2008:

     
  • OPTIMIZATION OF MICRO-FLUIDIC VALVE DIMENSIONS USING FINITE ELEMENTMETHODS, Multiphysics Conference, December 2008, Narvik, Norway, Hassan Abbas Khawaja, Imran Raouf, Khalid Parvez
  •